| Safety operation procedures for Glass cutting machine |
| Date：2013-11-01 Author：zhaoyang Hits：1130 |
| 1 Purpose regulate employee operating behavior, improve production efficiency , reduce or eliminate accidents. 2. Scope for all access to and use glass cutting machine related personnel. 3 Responsibilities of all access to and use glass cutting machine-related personnel must strictly comply with this regulation . Procedure: 1 , Wear special gloves and other protective glass protective equipment . 2 , in accordance with the device before starting point checklist point inspection of equipment . 3 , larger than is required in the handling of glass work closely with , to prevent accidents. 4 , check the machine is turned on any abnormal sound is normal operation . 5 , open belt fed machine glass button above and positioning . 6, in the empty glass to go check the origin and the end of the ride or run cutting edge , on both sides of prohibited personnel orbit close . If unforeseen circumstances may stop emergency brake. 7 , according to the processing of glass size adjustment device parameters to make the glass processing precise size . 8 , the operating personnel must be familiar environment of their own processing operations , looking for unsafe conditions and improved. Operator shall not leave the control panel . 9 , the glass should pay attention to safety in the demolition , to prevent cutting hands, feet and other injuries hit . 10 , the equipment required in the job after the end of refueling and maintenance of equipment |
| Previous： Glass cutting machine and grinding function parameter setting lacework |
| Next： The classification of the glass edge grinding machine, and the matters needing attention when using it |
TELL:+86 1902521703 Cell:+8615866605088（wechat/whatsapp)
@: brady0086@hotmail.com Wechat:brady0086 Skype:brady0086 QQ:1156692876
ADD:3966 ERHUANDONG ROAD,JINAN,250013,CHINA
