The classification of the glass edge grinding machine, and the matters needing attention when using it|insulating glass machine_laminated glass machine_glass washing machine_Aluminum window machine_Ji'nan Zhaoyang Machine Co., Ltd.|NEWS CENTER

NEWS CENTER

The classification of the glass edge grinding machine, and the matters needing attention when using it

Date：2013-10-31 Author：zhaoyang Hits：1584

Glass straight line edging machine Precautions : straight line edging machine , edging machine , beveling machine works the front and rear glass platen clamping and drive its linear motion for grinding . Use must pay attention to two points:

A front and rear plate combined with the rail surface to be lubricated regularly , otherwise they will face the front and rear plates and rails premature wear and affect the normal life of the machine . Although some models automatic lubricating device , but also always check lubrication piping is smooth ;

when the clamping force of the clamping glass size should be appropriate, too loose affect grinding quality, tight cause the machine to load increases, easy to produce jitter creeping phenomenon , easy to clip Shihai wear thin glass cullet . Clamping force sizes available a slightly larger glass folder on the machine tested , namely: the glass caught in the middle of the machine , stop state his hands moving glass plate , clamping force is transferred to the feeling just could not move his hands when appropriate.

Glass contour milling machine used Precautions :
1 sucker shaped machine table is consistent with the level of a greater impact on the grinding effect . Assembly manufacturers are five groups sucker for autogenous grinding carried out and pick up a uniform thickness of glue to make the sucker sucker height remains the same, so , in general, do not go disassembly sucker . If there is damage to the rubber suction cups , they have chosen to replace uniform thickness .

2 shaped machine vacuum pump in use for some time, due to water and other reasons there will be a vacuum decreased ( ie suction decreases ) and, therefore, should pay attention to check and troubleshooting , otherwise the machine in case of insufficient suction work , on the one hand will affect grinding quality, it also prone to accidents.

Double Edging Machine Use Precautions :
1 double edging machine is a high -grade milling machine, use of the best fixed two to three operations to ensure proper operation .

2 Bilateral grinding process errors or failures , the best original manufacturer sent maintenance and debugging , under normal circumstances do not overhaul in order to avoid messing up the program causing shutdown.

By molding machine Precautions :
1 by touch machine cam great impact on the grinding accuracy . By template face shape and size must be done accurately and finish higher . If profiled by template, at the transition must be smooth.

2 Replace the template and the sucker , be sure to keep the sucker face level, otherwise it will affect the quality of grinding .

In addition to the above description of the milling machine , there are a number of simple, single-purpose milling machine, such as chamfering machine , a small wafer machines, polishing machines. There are also a number of specialized processing of a product special milling machine, milling machine such as automobile rearview mirror , wash basin milling machines.

Correct and rational use of glass edging machine, not only to ensure normal production , but also serve to extend the life of the machine role.

Previous： Safety operation procedures for Glass cutting machine

Next： Hollow glass is currently held by butyl rubber views and Suggestions