| How to avoid a two-component insulating glass hand scraping gum processing defects |
| Date：2013-11-26 Hits：1023 |
| In the production of insulating glass , double sealed insulating glass production of high reliability and widely used. Two-component adhesive coated insulating glass machine has two kinds of ways with hand- applied coating . Currently the use of hand- coated hollow glass production due to low investment costs are mostly small manufacturers use . But hand- scraping gum hollow glass unavoidable presence of the following three defects Ratio inconsistent, non-uniform deployment , not immediately after the mixing so that adhesive applied to the insulating glass , allowed to cure to complete the start of the process in the fully cured glass Two component sealant machine appeared first meet the three above-mentioned defects can not be avoided when manually scraping gum . While high pressure through a plastic machine plastic coating to the glass structure on the edge of dense , and the same hand- mixed adhesive coated onto a glass on the soft bubbles . Like real concrete structural shock after shock is strong, but without concrete real shock even with the increased amount of cement can not achieve the required strength. So high standard insulating glass curtain wall hollow as are required to be coated using the machine the way of production , machine coating is the only best way to avoid hand- scraping gum four defects Currently, the use of two-component sealant machine must complete two-component coating machine , coating machine while actually been fully hand polishing filter glue , this glue good fluidity fine no impurities can be this glue to glue sealing performance itself has little , just to match the performance of the machine can be operated , is so fine after physical processing of plastic , plug the machine in use is often the case when if placed with ordinary hand scraping gum the machine construction work not 10 minutes the machine will not work. Gluing machine , as the name suggests it is a machine , the machine is better than the so-called artificial production of hollow glass can enhance a more efficient device can be a plastic machine on the market in addition to improving the quality of insulating glass , the enhancement of efficiency is not obvious , more and more devices are quite not as high potency artificial scraping gum, above reasons come ; supporting the use of expensive coating machine , production efficiency is not high, is the main cause of the majority of enterprises organic insulating glass instead of |
| Previous： Effect of surface tension on the glass forming |
| Next： From the stress characteristics common to see the difference between glass and glass |
TELL:+86 1902521703 Cell:+8615866605088（wechat/whatsapp)
@: brady0086@hotmail.com Wechat:brady0086 Skype:brady0086 QQ:1156692876
ADD:3966 ERHUANDONG ROAD,JINAN,250013,CHINA
