How to use UPVC window mahcine correctly|insulating glass machine_laminated glass machine_glass washing machine_Aluminum window machine_Ji'nan Zhaoyang Machine Co., Ltd.|NEWS CENTER

NEWS CENTER

How to use UPVC window mahcine correctly

Date：2013-09-05 Author：zhaoyang Hits：1002

All non-hot plug wiring and plugs Do not wear a coat with a scarf or the like clothes operations. Pair UPVC window machine should be checked from time to time, to eliminate potential accidents. Former must give first start filling the tank to avoid damage to the oil pump. Case emergency, immediately press the "emergency stop switch" to make the machine stop. manual debugging, you must operate normally after the cutting blade, otherwise it will top the bad blades.

1 Wear protective equipment required, tied cuffs are not allowed to wear a scarf, gloves prohibited, women braids should pull in the hat.

2 Press the lubrication chart refueling. Carefully checked before driving device, the handle, the stopper position is correct; each transmission part is flexible normal; leave the group did not finish on the live parts are tightened; idling test 1-2 minutes .

3 clamping the workpiece, the tool must be solid and reliable, without loosening. Wrench used must conform to standard specifications.

4 on the machine, the next workpiece, tool, tighten, adjust, variable speed and UPVC window machine measuring the workpiece and other work must stop. They should coherence, there is from the Lord.

5 high-speed cutting guard must be installed, the operator should wear protective glasses.

6 cutting, head, hands not close to the milling surface, take the tool to be removed when unloading the workpiece after strictly prohibited to touch or wipe with cotton and machine tool is rotating the transmission part is prohibited to pass across the rotating part of the machine or pick up tools and other items.

7 knife can not eat too fast, automatic tool path must be pulled off the table handwheel allowed to sudden changes in the feed rate. Finite bit stopper should be adjusted.

8 removable cutter, the table mat board shall prohibit a hand to prop cutter. Allowed direct removal by hand or mouth-blown iron. Abnormal situation should be immediately stopped, please check the relevant personnel.

9 are not allowed in the UPVC window machine running leave their jobs, must stop for any reason to leave, and cut off the power.

Previous： Advantages of the aluminum window machine

Next： How to choose the best price of the glass cutting machine?